Đề kết thúc học kỳ 2 (2013-2014) môn: tiếng Anh chuyên ngành cơ điện tử trường cao đẳng nghề Quy Nhơn

TRƯỜNG CAO ĐẲNG NGHỀ QUY NHƠN
Họ và tên: ………………………………………
Lớp: CĐ K7 Cơ Điện tử
ĐỀ KẾT THÚC HỌC KỲ 2 (2013-2014)
Môn: Tiếng Anh chuyên ngành Cơ Điện tử
Thời gian làm bài: 60 phút; Ngày thi:18/6/2014
Mã đề thi 1
PART I - Choose the word that has the underlined part pronounced differently from the others.
Câu 1: A. flammable	 B. harmful	 C. transformer	 D. magnet
Câu 2: A protective B. welding	 C. connect	 	 D. electronics
Câu 3: A. machinery	 B. ventilation	 C. consist	 D. oxidizing
PART II. Choose the word whose stress is different
Câu 4: A. system	 B. remove	 C. signal	 D. motor
Câu 5: A. information	 B. communication	 C. specification	 D. investigation
PART III - Choose the best answer from the four choices (A, B, C or D) given to complete each sentence. 
Câu 6: In order to remove a light bulb. You should _____ the bulb anti-clockwise.
A. get B. hammer 	 C. turn	 D. cut
Câu 7: There ____ a power cut in the workshop yesterday afternoon.
 A. is 	 	 	B. are	 C. was	 D. were
Câu 8: Goggles must be worn for ____ and ______.
A. grind/cut 	B. grinding/cutting	 C. grind/ cutting 	 D. to grind/ to cut
Câu 9: It makes a deep hole in a plank of wood. What is it?
A. a plane	 B. pliers 	 C. a drill	 D. a wrench
Câu 10: If you break a bar magnet in half, each half _______
A. becomes a bar magnet with two poles.  	 B. becomes unmagnetized.  
C. contains one magnetic pole. 	 D. None is correct
Câu 11: You want to measure the flow of current. What do you do? – I _____
A. insert the plug into socket	B. examine the meter	C. switch off the mains 	D. do nothing
Câu 12: What transfers rotation from the motor?
A. bearings	B. commutator	C. drive shaft 	D. brushes
Câu 13: The technician advised me that: “You ______never do any welding without a helmet or goggles”
 A. shouldn’t B. might 	C. must	D. should
Câu 14: Loops of wire in a motor rotate because a _________
A. battery effectively pushes a loop around in the field.  
B. current exerts a force on the loop, causing it to rotate. 
C. magnetic field exerts forces on moving electrons in the loop. 
D. magnet attracts stationary electrons in the wire. 
Câu 15: Here is a notice: “Switch off the mains before _____ the workshop”
A. coming	B. supporting	C. leaving	D. going
Câu 16: What is this object called? It is called _______.
A. a hammer	B. a chisel	C. a nut	D. a spark plug
Câu 17: What is the emergency telephone number for a medical case in Vietnam?
113	B. 114	C. 115	D. 1080
Câu 18: Magnetic field strength is ________
A. strongest close to a magnet. 	B. constant everywhere around a magnet. 
C. strongest far from a magnet. 	D. All of the above
Câu 19: What do you need to know if an alarm goes off at work? 
A. Evacuation procedures 	B. How to turn it off 	C. Where your boss is 	D. All of the above 
Câu 20: The function of bearings is _________ the drive shaft.
A. support	 B. supporting	C. supports	D. to support
Câu 21: Ventilation should be _______.
A. adequate	B. inadequate	C. unadequate	D. adequated
Câu 22: The whole current is turned off by _____ up the mains switch.
A. push	B. pushed	C. to push	D. pushing
Câu 23: Electrical fires must never be put out with _______.
A. sand	B. water	C. chemical	D. All answers are correct
Câu 24: What is used for temporary storage?
A. RAM	B. ROM	C. CPU	D. register
Câu 25: CPU is the abbreviation of ____________
A. centre processor unit	B. control program unit C. central program union 	D. central processing unit
Câu 26: Machine must be _______ maintained.
A. well 	B. good	C. badly	D. worse
Câu 27: How can you switch off the power? – Push the switch _______
A. upward	B. downward 	C. forward	D. outward
Câu 28: Mechatronics _______ a vital role in industry.
A. plays	B. playing	C. play	D. A & B are correct
Câu 29: Which word has the same meaning as “convert”?
A. invent	B. change	C. transmit 	D. become
Câu 30: A step-up transformer ________
A. doesnt change the voltage at all. 	B. decreases voltage. 	C. increases voltage.  D. None is correct
PART IV - Choose the underlined part among A, B, C or D that needs correcting.
Câu 31: The boring and dangerous jobs are now assumed from robots.
 A B C D 
Câu 32: Never wear eye protection when you do any welding.
 A B C D
Câu 33: Could you brings me the hammer, please?.
 A B C D
Câu 34: Small carbon blocks is called brushes
 A B C D
Câu 35: Please give me the hammer. – No, thanks. 
 A B C D
Câu 36: First removing the plug from the socket. Then cut the wire .
 	 A B C D
Câu 37: Motion sensor are used as a part of a burglar alarm to detect movement
 A B C D
Câu 38: An automation is any machine capable of operate independently.
 A B C D
Câu 39: This wire is not insulate.
 A B C D
Câu 40: Equipment must be used improperly.
 A B C D
Câu 41: When electricity flow around the armature wire, the iron becomes magnetized
 A B C D
Câu 42: Tools should be put away when in use
 A B C D
Câu 43: Field windings create a electromagnetic field
 A B C D
Câu 44: Check the brakes after you drive the car.
 A B C D
Câu 45: Machines is the concern of mechanical engineers.
 A B C D
PART V/ Choose the correct answer A, B, C or D 
Mechatronics integrates the principles of mechanical, computer, electrical, and controls engineering into a unified discipline while keeping the core mechanical engineering education.  The present mechanical systems are either controlled by the computers, or their intelligence is enhanced by the embedded sensors and electronic circuits. The sample applications include from simple household devices such as microwaves to industrial CNC Machines, robots, Medical Resonance Image (MRI) and X -Ray machines, aircraft and ship steering controllers, automobile power steering and engine controllers, telescopes and all  the way to the International Space Station. Mechatronics engineers are uniquely equipped to work as mechanical engineers with rich electronics, instrumentation and real time software engineering skills which are highly needed in present industry.
Câu 46: How many principles does mechatronics intergrate? A. two	B. three	C. four	D. five
Câu 47: Which product does NOT belong to mechatronics engineering?
A. CNC machines	B. robots	C. aircraft controller	D. ladder
Câu 48: Does a mechatronic engineer need to learn computer programming?
A. Yes, he does	B. No, he does not	C. Yes, a lot 	D. Yes, he should	
Câu 49: What does the writer think about mechatronics engineering nowadays?
A. It is easy	B. It is highly demanding	C. It is useless	D. All of the answers
Câu 50: Which title is the best for the above passage?
A. Sensors	B. What is mechatronics?	C. X-Ray machines	D. Mechanical systems
 Bình Định, ngày 8 tháng 6 năm 2014
TRƯỞNG KHOA Trưởng bộ môn	 Giáo viên ra đề
Đặng Ngọc Thái Bùi Thị Thu Hà	 Nguyễn Thị Thanh Nga